Tag Archives: quarantine

DIY Project # 16

19 Jul

DIY project number 16 is a tiny kit, micro to be specified. I dived into it after working on the big Gnome Trio for a bit. I thought it would be easy, but I was wrong. Thankfully, the instruction manual is in English and relatively easy to understand.

The lighting plan

The wiring work was so complicated. This miniature is the first one where the lights had a trail plan to set up. It is thoughtful of the manufacturer to include a battery in the battery pack to make things easier. After following the instructions thoroughly, I must say, it turned out well.

Inch tall room and micro furniture pieces!

The biggest challenge here is that the pieces are far smaller than what I have handled before. They are not just tiny but micro tiny! So I find myself using the tweezer more to pick up parts to glue; quite a change from all the previous work, and I find myself sighing a fair bit whenever things don’t go as planned. There were times when there is more glue on my fingers than on the pieces themselves.

Two floors completed!

Micro as it is, I foresee completing this set within a short time frame.

Look at My Stash!

16 Jul

I went on a shopping spree with the two recent online shopping promotion. I figured with the current lockdown, we’re not going anywhere, so the purchases are justified to keep busy.

But I did not realize the 6.6 and 7.7 Sales had me buying so many DIY miniature sets on top of other household knick-knacks. I ended up with eight purchases! Yes, eight new projects to add to my stash.

Now, I have ten sets altogether and so spoilt for choice. After completing DIY project number 15, I took a break but will start on project number 16 soon. Hmm. In the end, I chose the smallest box. It should be fun.

Battle of the Weeds, Part 2

13 Jul

There’s one section of the garden grass that does not grow well. We think it’s because there isn’t enough sunlight for the grass to thrive. The Creeping Charlie, however, seems to thrive well in this section. We debated whether to remove or let them continue growing in that section.

Being in a shaded spot and without grass, the section looks bald, unkept, and unsightly. Although we prefer to remove weed throughout the garden, we have decided to allow the Creeping Charlie to grow in this particular section to camouflage the unsightly bald patches. As a result, the area now looks green and pretty from a distance.

I guess, for once, the weeds have won this round of the battle with our compromise on this.

Patchy without grass but green with the Creeping Charlie!

DIY Project #15, Part 2

12 Jul

Working on two craft hobbies in tandem is not a good idea, I have to admit. Alternating between the DIY miniature project number 15 and the Gnome Trio carvings is more time-wasting and derailed my progress for both.

In the end, I chose to focus on the miniature to complete it because firstly, it is almost at the tail-end, and secondly, it is one piece as opposed to the three pieces of carving.

And over the weekend, I completed DIY project number 15, one day shy of three weeks’ duration. I modified things a little on the set to my preference instead of following the suggested layout as I felt the modification is more practical for the bedroom setting kit. I’m pleased with the result.

A very sweet bedroom setting
A bird’s eye view

Now that the miniature is complete, I will channel my energy towards the gnome carvings again. And when gnomes are ready, I will start with DIY miniature project number 16! Woo hoo, on a roll here to get out of that Groundhog Day feeling.

Groundhog Day

9 Jul

Lately, the will to do things is not quite there. I feel as if we are experiencing Groundhog Day. Sometimes even with a busy routine, there is a sense of repetition getting to the mind. Mental fatigue?

Day in, day out, we wake up, eat breakfast and go about the daily routine. Then before we know it, it’s lunchtime. Then we eat again and go about the daily routine again. Then it’s dinnertime. The next day, same old, same old. My goodness.

It has become predictable, repetitive, and so taxing on the mind. Sometimes I wake up unsure what day it is. Is it the weekend already or still a weekday? Then again, does it make any difference?

The worst part, we are under EMCO after the MCO was revised to this status and did not end on 7 June as initially planned. And with Covid cases on the uptrend even more dangerous now than ever, Groundhog Day will go on and on. Sigh.

DIY Project #15

6 Jul

Soon after completing the Gnome Trio, I started on the next miniature, DIY project number 15. Initially, it started at a good pace, but I got distracted again. I was having fun with the Gnome Trio, placing them at all possible sites in the house. I wanted to have their visual presence felt.

DIY project #15

But they dwarfed in comparison to the walls of the house. What I thought was big of the carved piece turned out minuscule! So I was determined to ensure the gnomes are more visual. Hence, I deviated from DIY #15 and started on a new set of gnome carvings that are double the original in size.

New gnomes are 8” tall, twice the height of the Trio

Three separate pieces this time, I have been working on them simultaneously. During the day, I would be at the garden terrace carving, hammering, and shaping the gnomes. And during the evenings, I am inside the house working, albeit slowly, on DIY project number 15.

And with the EMCO still ongoing, I think this routine is good to keep busy. And yes, I do cook to feed the family too.

The Gnome Trio has overshadowed DIY project #15

A Failed Lockdown

5 Jul

The announcement of a two-week enhanced lockdown (EMCO) took us by surprise last Thursday. From Saturday onwards, the place where we live, various districts in the state plus a few localities in Kuala Lumpur, was placed under this category. Dear, oh dear.

What this means, in my opinion, is that the previous Full Lockdown (FMCO) was a failed one. Locked down for so long, yet cases spiked up daily at an alarming rate. How are we going to survive these two weeks of even tighter restriction?

To combat this round, I have purchased several more DIY miniatures to keep busy. What else can I do to stay sane? Cooking, cleaning, and gardening do not count.

Double Celebration, Part 2

2 Jul

Mother Nature was good to us, for it didn’t rain on the big double celebration day. It was cloudy and did threaten to rain a little, but the hot weather held for us to have the outdoor barbecue as planned.

There was a constant stream of deliveries that morning. From my usual online shopping items to dessert cakes, more cakes and pastries, and the ultimate cake towards the evening, we were busy receiving all the deliveries. The fridge was almost bursting with all the delectable goodies, on top of all the barbecue food.

All sorts of mouth-watering yummies!
The funniest 4-inch tall birthday cake!
Our private garden birthday party
A colorful spread

It was a lovely garden dinner affair for the three of us. The birds left us alone, unlike our last barbecue for our Reunion Dinner. Even the mosquitoes did not disturb us. As our little one turned 20 that day, I guess we have to face the fact she is not so little anymore. Happy birthday M2, and many happy returns! Love you to the moon and back.

Double Celebration

29 Jun

Now that M2 is back safely at home with us, we plan to have a double celebration party with a garden barbecue tomorrow. Firstly, to mark her return and secondly, to celebrate her birthday, which falls on Wednesday.

However, the skies and weather have other ideas to thwart our plans. It has been raining a lot, unusual during this time of the year. Even today, it rained this morning and looking very gloomy. And there is a forty percent chance of rain tomorrow as well.

How are we going to have a garden party with such unaccommodating weather? We’ll have to cross our fingers and hope Mother Nature will be kind for a lovely double celebration.

Out of Quarantine

28 Jun

The wait is finally over! M2 is out from quarantine today. No words are needed to describe the joy and relief for all. We are together again except for M1 who is still in the US.