The box of Meranti is proving to be very fun and challenging. There are so many pieces and sizes to pick and choose. Soon after the flat head Citizen and Gnome, I immediately started on the glued two piece to carve another Giant Gnome. And in tandem another single piece Gnome, albeit smaller and shorter.
The Gnome population suddenly is booming! Maybe they should have their own hamlet instead of crowding Gigglesville.
Gnomie-wood? Hahaha….
After the completion of the Giant Gnome, I began experimenting with the new Meranti wood. And I find its density to be in between the balsa and basswood that I have been working with all this time. It is rather nice and different.
The balsa, despite being too soft and porous, and sometimes comes off easily in chunks if I apply a little bit more strength, has its plus points I must say. After all there wouldn’t be 128 Citizens of Gigglesville, a handful of Superheroes, Gnomes and Monuments to show.
As for the basswood, it is rather hard and needs more effort to carve and shape. So far, I have only three finished pieces with this wood type: Halloween Owl, Dinky the Dinosaur and Giant Gnome.
Now the Meranti wood is something else. Soft yet not too soft, and hard but not so, it is rather easy to work with. Within one hot Sunday afternoon at home, I carved up two familiar characters but with slight variations. A Citizen perched on a tree and a Gnome with a super tall cap. The only thing with this wood is the depth. The width is fine but lacking depth, so the two finished pieces have rather flat heads. That’s why it’s an experiment.
Next project in the pipeline is glueing two Meranti pieces together to give it depth and let’s see how this will turn out! Another Gnome in the making before I plan what new species or character to come out with. With the workbench in place, I don’t mind a drop in my social life as I stay at home nightly to work on my carvings.
It took me awhile to figure out what should I carve out of the four inch basswood block and finally I decided it should be a Gnome, a Giant Gnome. I felt that to do a Citizen, on this big scale, it would be a ‘waste’ as most of the wood would be shaved off to shape a Citizen.
Citizens generally are shorter, averaging about 26mm, compared to a Gnome that is about 50mm except for Gnome 2 who is 43mm. The Gnome’s height especially the cap is determined by how much balsa wood is left without wasting any of the wood upon carving.
If I had a 50mm piece left, it is better to carve a Gnome than to carve two 25mm Citizens because it’s just too short and hard to hold. So in essence, Gnomes came about because I did not want to waste my precious balsa wood.
This chunky short adorable fella definitely stands out from the other three Gnomes.
And Gnomes will also grow in numbers like the Citizens of Gigglesville. Maybe they should have their own hamlet. Gnomesville? Hmm…
It is awesome when my Aunty gave me a box full of Meranti (Shorea, Parashorea) wood pieces, excess or rather off-cut pieces from her factory. It’s more like a box of happiness. Imagine the carvings that I can do with all of them!
All the more reason to get that workbench. I went to the store, Ace Hardware to check out the Black & Decker WM225 model that I have identified but decided to order it online instead because the online price is a better deal. So over the weekend, the order was made. Yay.
My box of happiness awaits the new workbench. This is the beginning of something new. The Citizens of Gigglesville are now seeing a new growth, in size besides the numbers.
News headlines generally suck, world news suck and local news are no different. It is as though there are no positive news to update humanity. So it is better not to read the news than to learn what is going on around us to keep sane.
For this reason, I like to stay in my little bubble, away from all the shenanigans of the world for as long as I can manage.
So I carve. And I carve and carve.
After Monument 5 came about to kickstart the carving mood, everything fell into place. Within a few days, Monument 6, six Citizens and another Gnome were added to the population count of Gigglesville. No news is good news if this is the result.
After the completion of Dinky the Dinosaur at the towering four inch height, I find myself stuck to progress with little Citizens which are only an inch tall. Oh no!
I thought I could whip out more Citizens after M1 went back to university but somehow, I can’t seem to get the carving motor going. Suddenly a Citizen’s size, being so tiny to hold (compared to Dinky), seems like a gargantuan challenge. How did I ever reach 120 Citizens and a handful of Superheroes, Friends and Gnomes in the first place?
I had to will myself to stay focused and over the weekend, Monument 5 came about. Perhaps I should get a few more monuments or bigger pieces done up before settling into the carving mood on the smaller ones. The township needs to grow to enable further migrations this year.
Now that M1 has gone back to university, the home front is back to normal. In other words, no trips to the mall for shopping or eating out to check off a To Eat List on a weekday. I can go back to carving, hubby can tend to his air plants again and amazingly, M2 has even started doing her revision without being told.
The first thing I did was to finish up Dinky the Dinosaur. Chopstick limbs were added (with ice cream stick feet) and over the weekend whilst tracking her flight path flightaware.com, I gave it a gesso base. And Dinky will be given a good sanding down before a second gesso base and colors are added to bring it to life.
Finally, Dinky is taking shape. Next in cue, a whole new batch of Citizens and perhaps some new species.
Every now and then, the Citizens of Gigglesville do a mass migration. This time it’s en bloc for ten Citizens, with Lab Owl leading the way. Lab Owl is following M1 back to the US with giant Citizen #100 tagging along too while the rest, Citizens #96, #97, #103, #108, #109, #110 and #114 are migrating to spread love and giggles.
On top of these citizens, I actually managed to find a little time to carve a Friend of the Citizens character because M1 requested for one. In Gigglesville, there’s the normal Citizens, the Superheroes, the Monuments and this; not a gnome but a fish specifically, a Spiny Lumpsucker.
Named Spiny Lumps, it even has an occupation – a Marine Researcher. An apt career considering it is an ocean creature and Spiny will assist Lab Owl with research. Who knows? Maybe the storyline can evolve with flair… Hahaha…
With the mass migration, looks like I have to carve up more Citizens for Gigglesville to grow!
It was a Monday but felt like a Sunday. The girls slept in because we didn’t have any solid plans and being so stuffed from dinner the night before and the many nights before as well! We have been dutifully ploughing through M1’s To Eat List before she goes back.
As for us, hubby was at his usual puttering around the garden and I was back at carving after a hiatus. With M1 back, there has been so much to do but unfortunately, sitting around at home to carve has not been one of the activity.
So yesterday, it was nice to relax at home and Citizen #120 was born! 120. What a significant number and on the first day of the new year. I have come so far for Gigglesville and I think this year the township will boom at an even greater pace. I am excited at the prospect.
It may be a quiet start but it’s a good start. We are back at work today and M2 is at school without any issues waking up.
2017 is coming to an end with two days left to go. This is my last entry for the year and my, my, what a year it has been for me!
There has been many significant changes to our lives in 2017, the biggest one being the relocation of our design studio. We moved closer to home and it’s a mere 5km away only. What a difference for us especially when it comes to time management and traffic jam-free driving which is really nice.
It may be smaller in size but it’s a lot more cosy and I certainly feel happier. Work-wise we have been fortunate to be kept busy. Let’s hope this momentum carries onward to the new year.
On the personal side, I have been plagued with injuries causing me to lose interest in playing golf. While it’s unfortunate I lost my passion for the game I enjoy, it spawned a new passion, carving. Gigglesville was born with a whole new township of owl Citizens and Superheroes. They have been lovingly hand-crafted with each day of me staying home to recover from the tennis elbow.
Hubby also picked up a new interest in air plants. The house is now full of these everywhere and it’s nice to look at them. M1 had a good year at university, and did her second internship which we feel the experience was invaluable. She has matured so much. M2 turned Sweet 16 and doing well in school too.
We had several crayfishes that lasted and didn’t. These creatures are not easy to care for! Some fishes died too due to old age. Senior citizen of the house, Rooney, also official pet number one, turned ten and for the first time showed signs of his seniority. And demanding more attention than ever.
The list can go on for what happened throughout the year! As I reflect back, there’s more good and memorable ones than anything else and I carry these in my heart forever. With 2017 almost done––sometimes too fast with the days going by, sometimes super slow––I look forward to the new year and eagerly await what lies ahead with a positive outlook.
I want to thank all my readers, people from all over the world, friends and family who have followed me to read my stories and thoughts. It’s a nice feeling and I hope you’d continue to read and enjoy the musings.
A toast to 2017, thank you for memories and another toast to 2018, let it be an exciting year with lots to write, grouse and muse about!
Angieneering 
Remarks